Research

Publications

  1. Naskar, H., Dutta, D. and Mukhopadhyay, M., 2022. A Review on Electrical Micromachining using Silicon Electrodes, in Electro Micromachining and Microfabrication: Principles and Research Advances, Apple Academic Process, USA.

  2. Ghosh, P., Mondal, D., Dutta, D. and Mukhopadhyay, M. 2022. A Review on Micromachining of Ti-6Al-4V using Micro-EDM, in Electro Micromachining and Microfabrication: Principles and Research Advances, Apple Academic Process, USA.

  3. Harshvardhan Singh, Gaurav Kumar Rai, Anirban Bose, 'Prediction of Thermal Comfort and Performance Comparison of Various Machine Learning Models', 2nd International Conference on Thermal Engineering and Management Advances, Jalpaiguri Govt. Engineering College, Jalpaiguri, West Bengal,January,2022

  4. Anirban Bose, Kailash Roy, Sayan Pramanik, Sayar Rakshit, 'Cryogenic Nanofluid Flow in Laminar Region Through Rectangular Plate Fin Heat Exchangers -A Numerical Study', 2nd International Conference on Thermal Engineering and Management Advances, Jalpaiguri Govt. Engineering College, Jalpaiguri, West Bengal,January,2022

  5. Surajit Karak, Subhankar Roy & Anirban Bose, 'Automated Guided Vehicle in Material Handling for Industry 4.0 Plants', Interdisciplinary Research in Technology and Management, by CRC Press(Taylor & Francis Group), Chapter-84, ISBN: 978-1-003-20224-0 (ebk) ,2022

  6. Harshvardhan Singh, Gaurav Kumar Rai, Anirban Bose, 'Implementation of Obstacle Avoidance-An Aspect of Automated Load Carrier for Industry 4.0 Plant', Interdisciplinary Research in Technology and Management, by CRC Press(Taylor & Francis Group), Chapter-85, ISBN: 978-1-003-20224-0 (ebk) ,2022

  7. Abhishek Basak, Kailash Roy, Avisek Tunga & Anirban Bose, 'Performance Enhancement of Micro Channel Heat Sink Using Cu-Nanofluid-A Numerical Study', Interdisciplinary Research in Technology and Management, by CRC Press(Taylor & Francis Group), Chapter-86, ISBN: 978-1-003-20224-0 (ebk) ,2022

  8. Mukhopadhyay, M. and Kundu, P.K., 2021. Ecological and Economical Processing of Ti-6Al-4V with an Augmentation in Grindability, Sadhana, accepted for publication. (SCI)

  9. Santra, A., Mukhopadhyay, M., and Chandra, A., 2021 Analysing Tool Strength of an SPTT with Grooved Micro-channel on Tool Rake for Enhanced Heat Transfer. at 41st MATADOR Conference, University of Manchester, UK.

  10. Anirban Bose, Arunabha Chanda, 'Thermo-Hydraulic Performance Enhancement of Liquid N2 Based', GIS SCIENCE JOURNAL, , Vol. 8, issue 10,627-634,2021

  11. Anirban Bose, Kailash Roy, Sayan Pramanik, Sayar Rakshit, 'Comparison of Thermohydraulic Performance of Triangular Shaped PFHE Prediction by Various Machine Learning & Neural Network Models ', Book of Abstracts 3 rd International Conference on Sustainable Environment Energy & Construction – ICSEEC ’21 , PP 74, , December 2021

  12. Subhadeep Chakraborty & Anirban Bose, 'Comparison of Thermo-Hydraulic Performance Enhancement of Liquid He-Based Cryogenic Nanofluid Flow in Turbulent Region Through Rectangular Plate Fin Heat Exchangers', Lecture Notes in Mechanical Engineering. Springer, Singapore, Advances in Thermal Engineering, Manufacturing, and Production Management pp 147-155, Online ISBN: 978-981-16-2347-9; Print ISBN: 978-981-16-2346-2; doi: https://doi.org/10.1007/978-981-16-2347-9_12,July, 2021

  13. Mahata, S., Mukhopadhyay, M., Banerjee, A., Kundu, A., Mandal, B. and Das, S., 2020. Grinding titanium alloys applying small quantity lubrication. SN Applied Sciences, 2(978).

  14. Ghosh, M., Ghosh, S., Mukhopadhyay, M. and Neogi, B., 2020. On the Formulation and Functioning of a micro Haptics Actuator based Unit Braille Display Cell. Micro and Nanosystems (Accepted).

  15. Subhadeep Chakraborty, Soham Shamba Mukhopadhayay & Anirban Bose, 'Thermo-Hydraulic Performance Enhancement of Liquid He Based Cryogenic Nanofluid Flow in Laminar Region Through Rectangular Plate Fin Heat Exchangers -A Numerical Study', IOP Conf. Series: Materials Science and Engineering, , 2020

  16. Arindam Santra, Anirban Bose, Arunabha Chanda, 'Numerical Investigation on Performance Enhancement of Rectangular Microchannel by using Quadrilateral Fins Embedded on the Channel Bed ', Proceedings of the International Conference on Innovations in Thermo-Fluid Engineering and Sciences, [ICITFES - 2020], , NIT Rourkela, India, February, 2020

  17. Mukhopadhyay, M. and Kundu, P.K., 2019. Enhancing grindability of Ti–6Al–4V applying ecological fluids under SQL using SiC wheel. Springer Nature Applied Sciences, 1(600).

  18. Mukhopadhyay, M. and Kundu, P.K., 2019. Evaluating Application Potentiality of Unconventional Fluids for Grinding Ti-6Al-4V using Alumina Wheel. Materials and Manufacturing Processes, 34(10), pp.1151-1159.

  19. Mukhopadhyay, M., Kundu, P.K., Chatterjee, S. and Das, S., 2019. Impact of dressing infeed on SiC wheel for grinding Ti-6Al-4V. Materials and Manufacturing Processes, 34(1), pp.54-60.

  20. Anirban Bose, Arunabha Chanda, 'Thermo-Hydraulic Performance Analysis of CNT-H2O Nanofluid Flow in Laminar Region in a PFHE: A Numerical Study', Proceedings of the 25th National and 3rd International ISHMT-ASTFE,Heat and Mass Transfer Conference (IHMTC-2019), ,, IIT Roorkee, Roorkee, India., December , 2019

  21. Anupal Banerjee, Utpal Maji, Anirban Bose, 'Thermo-Hydraulic Performance Analysis of CNT-H2O Nanofluid Flow In Turbulent Region Through Rectangular Plate Fin Heat Exchangers -A Numerical Study', Int. J. Adv. Sci. Eng., , August, 2019

  22. Chandra Shekhar, Md. Adnan,Anirban Bose, 'Thermo-Hydraulic Performance Analysis of Plain Rectangular Plate Fin Heat Exchangers In Laminar Region -A Numerical Study', Int. J. Adv. Sci. Eng., , August, 2019

  23. Meghna Das Chowdhury, Shubham Giri , Anirban Bose, 'Aerodynamic Design of Longitudinal Head Shape of High Speed Train by CFD Analysis', Emerging Trends in Science and Technology, Narosa Publishing House, Chapter-7, ,April, 2019

  24. Kundu, A., Mukhopadhyay, M., Banerjee, A., Mahata, S., Mandal, B. and Das, S., 2018. Grinding of Titanium Using Alumina and Silicon Carbide Wheel; Journal of the Association of Engineers, 88(1-2), pp.53-63.

  25. S. Mahata, M. Mukhopadhyay, A. Banerjee, A. Kundu, B. Mandal and S. Das; Exploring Grindability of Ti-6Al-4V using an Indigenously Developed Environment Friendly Micro Pump based Cooling System; Indian Journal of Engineering Materials and Sciences (Accepted).

  26. Mukhopadhyay, M., Kundu, P.K. and Das, S., 2018. Experimental investigation on enhancing grindability using alkaline-based fluid for grinding Ti-6Al-4V. Materials and Manufacturing Processes, 33(16), pp.1775-1781.

  27. Mukhopadhyay, M. and Kundu, P.K., 2018. Optimization of dressing infeed of alumina wheel for grinding Ti-6Al-4V. Materials and Manufacturing Processes, 33(13), pp.1453-1458.

  28. Mukhopadhyay, M. and Kundu, P.K., 2018. Laser dressing of grinding wheels-a review. International Journal of Mechatronics and Manufacturing Systems, 11(2-3), pp.167-181.

  29. Mukhopadhyay, M. and Kundu, P.K., 2018. Development of a simple and efficient delivery technique for grinding Ti-6Al-4V. International Journal of Machining and Machinability of Materials, 20(4), pp.345-357.

  30. Shubham Giri,Anirban Bose, 'A CFD Analysis Showing Performance Enhancement of Journal Bearing by Using Al2O3-SAE30 Nanolubricant', Proceedings of 1st International Conference on Emerging Trends in Engineering and Science, ETES-2018, Asansol Engineering College, Kolkata, India,, March, 2018

  31. Meghna Das Chowdhury, Shubham Giri , Anirban Bose, 'Aerodynamic Design of Longitudinal Head Shape of High Speed Train by CFD Analysis', Proceeding of International Students’ Conference on ‘Emerging Trends in Science and Technology' organised by Institute of Engineering and Management, in association with, IEEE AP-MTT Joint Chapter, Section, , Paper ID E3.SPECTRUM 2018, Kolkata, February, 2018

  32. Sarmistha Kundu, Arnab Banerjee, Goutam Laha, Anirban Bose, 'A Finite Element Analysis Showing The Performance Enhancement of Spur Gear by Al-Sic Composite', Proceedings of the 1st International Conference on Mechanical Engineering Paper No. INCOM18-093, Jadavpur University Kolkata India, January , 2018

  33. Abhisekh Dey,Prithwiraj Chatterjee, Shubham Giri, Anirban Bose, 'Performance Enhancement of Hybrid Solar Water Heating System by CNT-Water Nanofluid', Proceedings of the 1st International Conference on Mechanical Engineering Paper No. INCOM18-060, Jadavpur University Kolkata India, January , 2018

  34. Supratim Saha, Anirban Bose, 'Analysis of Various Types of Blockage to Blood Flow in Artery through CFD Using Finite Volume Method', Proceedings of the 1st International Conference on Mechanical Engineering Paper No. INCOM18-051, Jadavpur University Kolkata India, January , 2018

  35. Mahata, S., Kundu, A., Mukhopadhyay, M., Banerjee, A., Mandal M., and Das, S., 2018 Exploring Grindability of Inconel 718 using Small Quantity Cooling and Lubrication Technique; Materials Today: Proceedings; 5(2), pp.4523-4530.

  36. Mukhopadhyay, M. and Kundu, P.K., 2018, June. Performance evaluation of conventional abrasive wheels for grinding Ti-6Al-4V. IOP Conference Series: Materials Science and Engineering, 377(1), pp. 012043(1-7).

  37. Kundu, A., Mahata, S., Mukhopadhyay, M., Banerjee, A., Mandal, B. and Das, S., 2018, Studying the effects of using liquid carbon dioxide and soap water in grinding Inconel 718. In IOP Conference Series: Materials Science and Engineering, 377(1), pp.012060(1-6).

  38. Kundu, A., Mahata, S., Mukhopadhyay, M., Banerjee, A., Mandal, B., and Das, S., 2018, Grinding of Inconel 718 using soap water jet and liquid carbon dioxide; Book Chapter: Advanced Manufacturing and Materials Science, Springer International Publishing.

  39. Kundu, A., Mukhopadhyay, M., Mahata, S., Banerjee, A., Mandal, B. and Das, S., 2018. Grinding Titanium grade 1 alloy with an alumina wheel using soap water. Procedia Manufacturing, 20, pp.338-343.

  40. Mukhopadhyay, M., Chatterjee, S., Kundu A., and Das, S., 2019, Effect of dressing infeed on alumina wheel during grinding ti-6al-4v under varying depth of cut; at AIMTDR 2018, (for Springer Book Chapter, Scopus).

  41. Rai, B.R., Mukhopadhyay M., and Kundu, P.K., 2019, Evaluating the grinding ratio and surface quality of ti-6al-4v under varying grinding pass count and depth of cut; at NFEST 2019, IOP Conference Series.

  42. Kundu, P.K., Rai, B.R., and Mukhopadhyay M., 2019, Experimental Investigation on the effect Of Grinding Infeed And Pass Counts On Grindability Of Mild Steel; at CPIE 2019 (for Springer Book Series).

  43. Mukhopadhyay, M., and Kundu, P.K., 2019 Improving Grindability of Ti-6Al-4V using an Economic and Environmental Friendly Drop by Drop Delivery Technique; Materials Today: Proceedings (Accepted).

  44. Mazumdar, M., Roy, S., Mukhopadhyay, M., Santra, A. and Ghosh, D., 2020. Simulative analysis for dry grinding of Ti-6Al-4V using silicon carbide wheel. ICAME 2020, Aliah University, Kolkata.

  45. Mukhopadhyay, M., and Kundu, P.K., 2017, Laser Assisted Conditioning of Aluminium Oxide Grinding Wheel using Nd:YAG Laser: A Review; Proceedings of National Conference on Advanced Functional Materials Processing and Manufacturing; pp.63-66; 2-3 February, 2017.

  46. Kundu, A., Mahata, S., Mukhopadhyay, M., Banerjee, A., Mandal, B., and Das, S., 2017, Investigating the use of Soap Water in SQL Mode during Grinding Titanium Alloy; Proceedings of National Conference on Advanced Functional Materials Processing and Manufacturing; pp.7-10; 2-3 February, 2017.

  47. Ghorai, A., Mukhopadhyay, M., Kundu, P.K., and Das, S., 2019, Experimental Investigation on Enhancing Grindability of Ti-6Al-4V Under Varying Coolant Concentration. In: National Conference on Trends and Advances in Mechanical Engineering, Kalyani, India 2019.